fbpx

service

  • Bio Racing Premix

    Bio-Rotary Racing Premix is designed specifically for rotary engines. This technology addresses the three major concerns in the rotary community: (1.) proper lubrication, (2.) issues with carbon buildup, and (3.) premix compatibility with any type of fuel. It also protects against corrosion in fuel systems, and has a fuel conditioner built into the product. Renewable Lubricants offers the only sustainable, carbon negative, (green) premix designed for high performance rotary engines.

    PROVEN BENEFITS

    Longer trouble-free engine life
    Lowers emissions (burns clean) and improves fuel economy
    Best in class apex seal lubrication
    No exhaust smell
    Reduces and cleans carbon deposits
    Lubricates entire rotor and housing
    Sustainable, carbon negative formulation
    Helps keep spark plugs clean and increase plug life
    Compatible with ALL fuel types (Gasoline, Ethanol Blends, and Methanol)


    Recommended Premix Amounts:

    Use 4ml of Premix for 1 Liter of fuel, alcohol fuels (High Ehtanol Blends or Methanol), for track use or spirited driving with modified and boosted engines.

    Use 2ml of Premix for 1 Liter of regular fuel (Gasoline), for daily drivers that are not modified or NA engines.


    Technical Data Sheet (TDS)
    Bio Rotary Racing Premix FINAL 051822
    Safety Data Sheet (SDS)
    80491 80492 80493 80494 80496 Rotary Premix SDS

    Read More

  • Greddy Panel Air Filter MX-5 NC

    GReddy Airinx-GT Air Filter
    This GReddy Airinx-GT high performance filter goes in place of the original air filter of your vehicle. Made with special fibers, it provides a higher intake flow compared to the standard filter while its laminated metal structure guarantees excellent rigidity and durability. The rubber housing is fully sealed and prevents even the smallest dust from entering the intake. This filter is very high quality while remaining particularly affordable and fits directly in the original air box.

     

    GReddy Airinx-GT MZ-7GT Air Filter

    • For Mazda MX-5 NC
    • Direct replacement of the existing filter
    • High flow and excellent filtration
    • Improved performances
    • Easy installation
    • Made in Japan
    • Engine codes : LF-VE
    • GReddy part no. : MZ-7GT (12542507)

    Characteristics

    Car Make Mazda
    Car Model Mazda MX-5
    Engine Code LF-VE
    Manufacturer GReddy

    Read More

  • Greddy Panel Air Filter RX8

    GReddy Airinx-GT Air Filter
    This GReddy Airinx-GT high performance filter goes in place of the original air filter of your vehicle. Made with special fibers, it provides a higher intake flow compared to the standard filter while its laminated metal structure guarantees excellent rigidity and durability. The rubber housing is fully sealed and prevents even the smallest dust from entering the intake. This filter is very high quality while remaining particularly affordable and fits directly in the original air box.

     

    GReddy Airinx-GT MZ-8GT Air Filter

    • For Mazda RX-8
    • Direct replacement of the existing filter
    • High flow and excellent filtration
    • Improved performances
    • Easy installation
    • Made in Japan
    • Engine codes : 13B-MSP
    • GReddy part no. : MZ-8GT (12542508)

    Characteristics

    Car Make Mazda
    Car Model Mazda RX-8
    Engine Code 13B-MSP
    Manufacturer GReddy

    Read More

  • Idemitsu 10w30

    Do you feel that you aren’t getting the power you should be from your rotary engine? Are you experiencing bearing wear under severe (or possibly under not-so-severe) operating conditions? If so, you may be using the wrong engine oil. Idemitsu 10W-30 can reduce or even eliminate some of the problems you may be having.  

    As the developer of the engine oil for the winning 1991 LeMans Mazda 787B and a long time supplier of vital lubricants to Mazda, Idemitsu has intimate knowledge of the requirements of rotary engines.   

    With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals. 

    • Allows for better sealing of the chamber, facilitating more power generation. 
    • Extends the life of turbochargers by reducing bearing coking.
    • Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.
    • Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-to-metal contact and minimizing bearing wear.
    • Developed to reduce entrained gas generation. Entrained gases reduce the oils ability to prevent metal-on-metal contact, thereby increasing main bearing wear.
    • Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output. 

    Click here for product specifications.

    Read More

  • Idemitsu Rotary Premix

    Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage.
    In order to increase lubrication within the rotary, Idemitsu developed Idemitsu Rotary Premix. 
    At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage.

    • A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed.
    • Special detergent/dispersant additives keep you fuel injectors clean to reduce maintenance.
    • Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine.
    • Special additives allow for better sealing of the chamber, creating greater efficiency and more power

    Click here for product specifications.

    Read More

  • KN Panel Air Filter RX8

    K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

     

    SPECIFICATIONS
    Air Filter Shape Panel
    Air Filter Material Cotton Gauze
    Washable Yes
    Height 0.938 in (24 mm)
    Outside Length 14.75 in (375 mm)
    Outside Width 8.875 in (225 mm)
    Package Contents 1 Air Filter
    Package Quantity 1
    Warranty 1,000,000 Miles/10 Year
    Product Style Panel Air Filter
    Weight 1.4 lb (0.6 kg)
    Filter Re-Oiling Amount 1.92 oz (57 ml)
    Product Box Height 1.88 in (48 mm)
    Product Box Length 17.81 in (452 mm)
    Product Box Width 11.06 in (281 mm)

    Read More

  • Mazda RX7-RX8 5 Speed Gearbox Shifter Bushing

    Genuine Mazda 5 gear Shift Bushing for RX7-RX8.

    Read More

  • NGK Sparkplugs RX8

    Genuine NGK Spark Plug set for the RX8, consisting of 2X NGK RE8C-L and 2X RE9B-T (as recommended by Mazda Europe).

    These plugs offer superior Iridium Technology for prolonged longevity and are an ideal upgrade for all USDM cars that use the hotter RE7C-L.

    Read More

  • RX8 Fuel Pump pre-filter

    This is a rare to find replacement in-tank fuel pump pre-filter.

    Read More

  • RX8 Oil Filter

    Micro Oil Filter for RX8 (Series 1, Years 2003-2009) made by Micro Nippon Ltd. Japan.

    Read More