AEM High volume fuel pump (340l/h)
AEM's High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.
The AEM High Flow In-Tank Fuel Pump (PN 50-1000) flows 340 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Click on the flow curves and current draw vs. fuel pressure graphs below for more information.
AEM High Flow In-Tank Fuel Pump Features:
Designed for high output naturally aspirated and forced induction EFI vehicles
In-Tank design
Tested to flow 340 lph @ 43 PSI
39mm diameter fits most applications
Offset inlet design eases installation
Each pump individually tested
For gasoline vehicles (pump life may be diminished when used with E85 fuel)
Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead
Weight: 10.1oz (285grams)
Outside Diameter:39mm OD
External Materials: Black plated steel with laser etching
Inlet Fitting:7.7mm ID, 11.0mm OD
Outlet Fitting:8 mm hose clamp
PRV Activation: 90 PSI
Impeller Design: Single Scroll Hard Anodized Aluminum Turbine
VOLTAGE SPECS:
Connector Terminal: 6 mm Spade (pos/neg)
Min Voltage Input: 6 volts
Max Voltage Input: 18 volts
Current Draw (40 psi): 12 amps (13.5v)
Current Draw (80 psi): 15 amps (13.5v)
* Power rating given at 43 PSI, 13.5v at the pump with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.
Can be used with the RX8 in-tank fuel pump assembly.
English
Ελληνικά
Security policy
